Prints & Merchandise on Sale

Exploring The Grand Canyon of Arizona

The Grand Canyon of Arizona, one of the natural wonder on planet earth, offers an unique challenge to hikers. While visitors can get a glimpse of it's beauty from the rims, many wish to go down the trail and negotiate the steep canyon edges to see how The Colorado flows through the heart of the Canyon.
Amid the COVID-19 pandemic, I teamed up with some of my hiking buddies to stay 2 nights at Bright Angel Camp and another 2 nights at Indian Garden. The weather is extreme during Winter & Summer, so we decided to go down there in March to avoid both cold and heat.
While all of my hiking buddies were experienced hikers. Their mission was to hike, camp and enjoy the nature. I had one additional in my mind, i.e. the photographing the canyon from deep inside. So when I showed up with my heavy DSLR, tripod and other photography gadgets in my backpack, they were concerned if I would be able to carry that much of extra load. Some even offered help to carry few of my items.  I felt lucky to have such friend, but I assured them that I was ready for it.

Day One: Bright Angel Lodge, South RIM

I visited South Rim several times before but I always missed sunset view due to storm. However, this time the west sky was clear and the opportunity to photograph the sunset over the canyon popped up.

Golden Evening Lights over the Canyon Edges

The sunset view can be mesmerizing, especially when combined with cloud. You can purchase a print of this photo here. This was shot from Rim Trail, just outside Bright Angel Lodge. The Camera was mounted on a tripod and exposure metering was set to matrix with auto exposure bracketing for 5 shots at 0.7 EV each. The photos was latter processed & merged in Lightroom to balance the exposure in foreground & the sky.

Wild Horses near South Rim Entrance

Grand Canyon is not known for many wildlife. I've heard about Mountain Goat, Mule Deer and Squirrel. I did not have any opportunity to photograph Mountain Goats before, so was carrying my 70-200 f2.8 lens, the lightest one that can be used for wildlife photography.  We spotted these two magnificent animals just  few miles inside after the south rim entrance. I had to change lens to get an appropriate shot. While I was busy in getting out the 70-200mm from my bag, my hiking buddies were already photographing them with their cellphone camera. By the time I was ready, the horses already  veered off deep inside the forest. After several shots showing their back, I finally got this one when they decided to change direction. You can buy a print of this here: Wild Horses at Grand Canyon.

Day Two: To Phantom Ranch via South Kaibab Trail


We stayed in Bright Angel Lodge and wanted to catch the sunrise from South Kaibab next morning. So the wake up call was at 4:30am to be ready for the first Hiker Express leaving at 6:00am. We reached the pickup area by 5:45am but the authorities were running the buses only at half capacity due to COVID-19 restriction. Unfortunately, we couldn't board the first ride and we thought we would miss the sunrise. The buses came back after dropping the first batch of hikers.

Soft light over the Canyon from Sunrise

When we reached the South Kaibab trailhead, the morning sun just broke from the cloud and hit the Canyon Edges. You can order a print Here

A mile down the trail a day hiker was coming up the trail. He took special interest in my camera gear and asked if I've photographed the goat. "I've not seen one yet" was my response. There, he pointed out the goat chewing the cud. 
A Mountain Goat of The Grand Canyon

About the halfway mark, the Mule Train came. You have to step aside towards the rocky side of the trail to let the Mules pass. So I took this shot from distance before giving them the right of way.

The Grand Canyon Mule Train


After 3 hours of hiking down on the trail the Black Bridge finally came into  view. It was magnificent especially with the rafting boats docked on the beach.

The Black Bridge over the Colorado River 

We setup our camp in Bright Angel Campground, it looks amazing at night.

Bright Angel Campground at Night


Day Three: Phantom Ranch


I woke up around 4am and saw the starry sky. I realized that it was my best chance to shoot a star trail shot. It took me a short walk to find a spot from where I could see the Polaris aka the North Star. About 10 minutes into the shot, a group of early morning hikers came from the north and walked across my frame. I was sure the star trail were ruined but here is the 30 secs frame showing the hikers trail.

Night Hikers from Cottonwood Campground returning to South Rim

You can order an art print from this shot from Here

I had to restart my shot. I eventually had around 45 minutes of start trails before it was dawn.

Star Trail shot near Phantom Ranch


Once I was done with star trail shot, I returned to my tent and decided to take the day easy.  We started late after breakfast and hiked few miles on North Kaibab before returning to take the Clear Creek Trail to see the river from the top and the sprawling South Kaibab descending to the river.

South Kaibab Trail Descending to the River

You can order a print of this Here. I did plan to attempt another star trail shot in the night but the cloud queen was laughing at me. The night was colder and the storm was waiting for us for the next night.


Day Four:  Bright Angel Campground to Bright Angel Trail

It was a lazy start in the morning to break the tent and pack out toward Indian Garden. I spent some time to find the perfect spot to photograph the bridge. Eventually, I stopped when I was able to put both the bridges in the frame. As I fixed my tripod and got ready for the shot, a group of rafting boats drifted into the frame. I couldn't have asked for more and immediately captured this shot.

The Twin Bridges over Colorado - Connects N. Kaibab to S. Kaibab & Bright Angel Trail

The Bright Angel Trail is much easier than the South Kaibab until you hit the Devils Corkscrew which keeps climbing in multiple switchbacks. There is a waterfall on the Garden Creek but it's not easily seen by the hikers.
Devils Corkscrew and Garden Creek Waterslide
You can order a print for this shot Here

When we reached Indian Garden campsite, we already knew that a snowstorm was coming at night over the south rim, but down there at campsite, it was safe to stay. Any photographer would consider storm an impending storm is an opportunity to photograph something spectacular. I did not wanted to miss sunset view from Plateau Point.

Storm Cloud and Canyon Edges illuminated by Sunset Light

You can order a print for this Here

The rain started probably around 8pm. We could hear high wind flowing over the trees but our tents were safe. The Indian Garden campsite is almost inside a fortress due to canyon walls covering 3 sides and the trees.  You could hear the storm but you won't feel it.

Day Five: Around Indian Garden Campground


We did not see the sun on the next day. The spent the morning mostly in tent or in the picnic table under the shed. The storm started clearing in the afternoon.  It was time to photograph some clearing storm over the canyon.

A Raptor Flying Over The Canyon

When I spotted the bird going into the storm cloud, I was hoping it is the famous California Condor but once I looked through my lens for a clear view, it turn out to be a Kite.

Snow over south rim - shot from Indian Garden Campsite

As I turned toward South Rim, we could see the snow deposited by the storm. That gave us the clue that the next morning it would not a a normal hike to return to the top. I was beginning to debate with myself, if I should pack my camera in the backpack to negotiate the icy trail.

 Before returning to the tent I had a sort interaction with these two permanent residence of  The Grand Canyon's Indian Garden.
Grand Canyon Mule Deer

The Rock Squirrel of Grand Canyon

Day Six: The Hiking Out

The next morning was bright and sunny. We started hiking out around 9am. The late start was in the hope some icy spot on the trail would be cleared by the time we would reach there. But that was unrealistic as the top portion of the trail does not get sunlight until late afternoon. This was one the last shot I took at 3 miles Resthouse before I decided it was for my safety to put away the DSLR inside the backpack. 

The Three Miles Resthouse on Bright Angel Trail

Then it was all about negotiating an icy trail with hiking sticks. We reached the top around 1pm. My shoulders were thanking me as soon as I put the backpack down.

How to remove dirty sensor spot from your photo - Nikon Only


Imagine you just returned from a vacation of a lifetime and your camera's memory card is full of memories :) I mean wonderful photographs you had taken during the entire vacation. You just can't wait to see how those photos would look on the big screen. So the first thing you would do after reaching home would be transferring those photos to your computer and opened them in the viewer. And your excitement just disappeared, something was not looking right! There were dark spots in few places in those photos. You checked the next photo, and the next one after that, and the last one of the lot. They all have the same problem. Those spots came from your image sensor. It was dirty before you went for vacation and somehow you forgot to clean it. Maybe you did not know it was dirty. But what could you do now? Removing those spot using photo editing software would be a daunting task. You may not even have those software license or the skills!! 

Fortunately, Nikon has a feature in their camera called 'Dust off Reference Photo'.  Along with their free Capture NX-D software, you can batch process all of your photos at once and all of those spots would magically disappear from your photos. I'm going to walk you through step by step on how to achieve this.


Before you read further, I must tell you that this process works only with RAW photos i.e. files names with .NEF extension.

Taking the Image Dust Off ref photo:

  1. First press the 'Menu' button in your Nikon DSLR
  2. Scroll down to 'Setting'
  3. Enter the setting menu and scroll down to 'Image Dust Off ref photo

  4.  You need to choose the first option, i.e. 'Start'  if you are going to need to clean up images taken before you perform this activity. Here is what Nikon says. "Dust off reference data recorded before image sensor cleaning is performed cannot be used with photographs taken after image sensor cleaning is performed. Select Clean sensor and then start only if the dust off reference data will not be used with existing photographs."
  5. Once you press 'Ok' for any of those option, the camera will pop you the following message. 

  6. Read carefully, it says "BRIGHT featureless WHITE Object". This is where most people get it wrong.  I use a A4 / Letter size printer paper for this. Now for the 'Bright' part, make sure the light is good enough. It is better if done in outdoor, however you can use a well lit room as well. If the light is not enough, the camera will display the following error.
    If you get such error, it simply means the light is not bright enough. Though Nikon says all setting is automatic, here are few things you also need to consider.
    1. The focal length of the lens should be 50mm or more
    2. Put it in aperture priority and use the highest f number available in your lens e.g. f22 or f32
    3. Distance from the lens to the white object should be 10cm or less
    4. If the lens is manual  focus, set the focus to infinity
  7. Once the camera is successful in taking the ref photo it would look something like this. 

  8. Now take another photo of any object in regular exposure. Nikon would not tell you about this but trust me, you will need this extra photo. I prefer taking a shot of blue sky. All sensor darts are easy to identify in blue sky shot without cloud.
  9. Now transfer these two photos ( dust off ref photo and the regular photo you just shot) into the same directory where you have all those images with dirty spots.
  10. Open the folder in Nikon Capture NX-D software and click on any of the photo you want to fix.
  11. Go to Camera and Lens Corrections on the left panel and click on the 'Change' button you see just below 'Dust off ref photo was taken at:' 

  12. You would get an error messages like this below. 

  13. You know that you just copied the dust off ref photos in that directory. So why Capture NX-D can't find it? This is where everyone gets it wrong. Your dust off ref photo must have a timestamp close to the photo you want to fix. It can't apply to a photo taken few days before the dust off ref photo was taken. This is also logical as actual dust on ref photo must match with the one we are fixing. So what can you do if the Capture NX-D can't find the ref photo. I would suggest a workaround that is super easy to use.
  14. We will use the photo you have taken just after you took the dust off ref photo. Click on that photo and repeat step 11 above. Now Capture NX-D will happily apply the ref photo and remove it's dust. If that was a blue sky shot, you can enlarge and verify all darts are gone.
  15. Now go to Adjust tab and click on 'Copy All Adjustment. Once done, select one of  the actual image you want to fix and come back to Adjust(A) tab and click 'Paste Adjustment'.  That's it, your image would now be spot free.


Now you can do a batch processing by selecting all the remaining images at once and then click on 'Paste Adjustment' as you just did for one of the image.  You now got your holiday images spot free, time to share them with family and friends. 

Few points to note:

1. If you want to use this feature, do not perform a 'Clean Image Sensor' operation before you take the dust off reference photo. The ref photo must be taken in the same condition of your camera image sensor when you shot those photos that are showing dark spot on sensor. Obviously, cleaning would remove some dart from the sensor.
2. If your camera has setting 'Clean image sensor during shutdown / startup', you may want to disable that setting. Any DOF taken after sensor cleaning operation will not be able to clean the photo properly. I have it disabled and perform that operation only once in a week or month depending on the frequency of my photo shoot. This in-built image sensor cleaning function can't remove stubborn darts, it is only useful for removing loose darts mainly accumulated due to static electricity. 

3. Always shoot RAW and latter convert them into jpeg. If you really need immediate jpeg then shoot RAW + jpeg. Most of the edit features only work on NEF files.
 
All the best with your future images. If this blog was useful to you, please subscribe for future tips or leave me a comment.

Related Blog Post: How To Clean DSLR Image Sensor




Contact ME

Name

Email *

Message *